Home Testing of Soil --Texture Analysis
(Best Viewed on Internet Explorer and Firefox browsers.)
Related Links: This is a sample that I ran at home, and this is to determine the soil texture – which is the amount of sand, silt, and clay in the soil. That will tell you a little bit about your soil’s drainage and water retention capabilities. All you need to do is take an empty jar, fill it with soil to about half way. Then fill it about 7/8 or 3/4 of the way full of water. Put the lid on and shake it, and then let it settle out.
As you watch it settle, in 30 seconds, you’ll see the sand come out first. Those are the largest particles. In 30 minutes, you’ll see the silt layer come out. Those are your medium sized particles. And then over the next 24 hours, as the water clears up, you’ll see the clay settle out. So you can see what your soil texture is.
This is a soil sample that I ran with my soil at home. I don’t have very much sand, but I do have quite a lot of silt that has settled out to this layer. And then I also have quite a bit of clay, which is very typical of my soil at home. The water is starting to clear, but at the same time I can look at the surface of the water and see the organic matter floating on the top. This will tell me a little bit about the health of my soil and the organic matter content. So these are the first tests I would run as a home gardener on my soil at home.
For more information, visit your local extension office, or visit our website.